Everyone

What Is a Heat Pump and How Does It Work?

A plain-English explanation of how heat pumps move heat instead of making it, why that makes them efficient, and what the main parts do.

A heat pump is a heating and cooling system that moves heat from one place to another instead of creating it by burning fuel or running electricity through a resistance coil. In winter it pulls heat from the outdoor air, the ground or a body of water and releases it inside. In summer the process runs in reverse, removing heat from your building like an air conditioner.

How a heat pump moves heat

Every heat pump uses the same refrigeration cycle found in your fridge:

  1. Evaporate. Cold liquid refrigerant flows through the outdoor coil. Even in cold air, the refrigerant is colder still, so it absorbs heat and boils into a gas.
  2. Compress. The compressor squeezes that gas, which raises its temperature well above room temperature.
  3. Condense. The hot gas flows through the indoor coil, gives up its heat to the air (or water) being circulated through the building, and condenses back into a liquid.
  4. Expand. An expansion valve drops the pressure, the refrigerant becomes very cold again, and the cycle repeats.

A reversing valve swaps the roles of the indoor and outdoor coils, which is how the same equipment provides both heating and cooling.

Why heat pumps are so efficient

Because a heat pump moves heat rather than generating it, it can deliver more heat energy than the electrical energy it uses. This ratio is called the coefficient of performance (COP). A COP of 3 means the system delivers three units of heat for every unit of electricity. Electric resistance heat, such as baseboard heaters, always has a COP of 1, and even the best fuel-burning furnaces convert slightly less than 100% of their fuel into heat.

Efficiency falls as the temperature difference between outside and inside grows, which is why performance in cold weather matters so much. Modern cold-climate models are designed to keep working efficiently well below freezing. See our cold-climate guide for details.

The main parts of a system

  • Outdoor unit: houses the compressor, outdoor coil and fan (or, for geothermal systems, connects to buried loops).
  • Indoor unit: an air handler connected to ducts, wall- or ceiling-mounted ductless heads, or a hydronic module that heats water for radiators or floor heating.
  • Refrigerant lines connecting the two.
  • Controls: a thermostat or remote. Variable-speed ("inverter") systems adjust their output continuously instead of switching fully on and off, which improves comfort and efficiency.

Is a heat pump right for you?

Heat pumps work in most climates and building types, from apartments to warehouses. The best fit depends on your climate, existing ductwork, insulation, electricity and fuel prices, and the incentives available where you live. Good next steps:

This guide is general information, not professional advice. Every building is different; get a load calculation and written quotes from licensed contractors before deciding. Spotted an error? Let us know.

Get the heat pump briefing

New guides, incentive changes and buying advice, sent occasionally. No spam, unsubscribe anytime.